Trucking

Trucking

is the transportation of cargoes and passengers by land transport on trackless transport.

СThe cost of transporting cargoes by trucking

The price of trucking depends primarily on the cost of fuel. In addition, the following factors influence the price:
• Route. In this case not only the length, but also the presence of paid autobahns is important.
• Paperwork. It does not matter whether it is international transportation or export of goods from the port, first of all, it is necessary to prepare all permits.
• Truck type. Delivery in a refrigerated container is more expensive than usual.
• Вид груза. Тариф на перевозка негабаритных, опасных и хрупких грузов зачастую выше. 

Types of trucking are divided:

by the size of the cargo and by territory.

Types of trucking by the cargo size:

Oversized. If the cargo weighs more than the maximum permissible norms for transportation by a single transport or road-train, or exceeds at least one of the following parameters: 20 meters in length, 4 meters in height and 2.55 in width, then it belongs to the category of oversized and requires special clearance and coordination with public services when transporting it through the city. Also, such cargo requires obligatory escort.

Groupage. A type of transportation in which a mean of transportation is filled with small-sized cargoes from different companies, but with a single place of destination. In this way, a significant part of the funds is saved. It is most advantageous to form consolidated cargoes from small-sized goods.

Massive. Trucking of large volumes of similar cargoes. This type of transportation is more relevant for railway transportation, when the amount of cargo exceeds 40 tons. It is not advisable to form a road-train with a large tonnage.
We engaged in all types of trucking. We can arrange for you a road-train or groupage transport by road at your request.

Types of trucking on a territorial basis

technological (on the territory of one enterprise)
Urban
Suburban (transportation carried out outside the city, but no further than 50 km outside the city)
Intra-regional
Inter-regional (transportation within the territory of administrative and economic regions or between neighboring regions within the same country)
international

CMR

is an international road waybill, which is a waybill used in international trucking of goods and is used in countries that have joined to the Convention on the Contract for the International Carriage of Goods by Road. CMR is a document proving the fact of the conclusion of a contract for road transport of goods.

A certificate of origin (also a certificate of origin of goods)

is a document that indicates the country of origin of goods. the customs duty and the possibility of obtaining benefits under trade agreements depends on the country The origin of the goods.

Cargo customs declaration (CCD)

is the basic document issued when moving goods across the customs border of the state (export, import). The cargo customs declaration is drawn up by the cargo manager and certified by the customs inspector, which later serves as the basis for passing through the border. The declaration contains the information about the cargo and its customs value, the transporting vehicle, the sender and the recipient.

The information about the cargo you need to provide in order to carry out the transportation:

You must provide a packing list, volume, weight and dimensions of the cargo, conditions of transportation, information about the sender and recipient.

General cargo

is any piece cargo with or without packaging that can be transported by vehicles without organizing special conditions for loading, unloading and transportation itself.


Dangerous goods or hazardous materials

a cargo that can cause harm to the health or life of people and / or the environment, as well as the vehicle by which it is being transported. Dangerous goods are a category of goods that are either prohibited for transportation or certain restrictions are established for their transportation due to the observance of security measures. These goods require the completion of special documentation and special packaging during their transportation.

Perishable goods

Perishable goods are those goods that, under normal conditions, i.e. without proper cooling and maintenance of optimal temperatures and humidity, are easily spoiled and therefore require special conditions for transportation.

Cargo shipper

a natural or legal person who, under a contract for the transportation of goods, acts on his own behalf or on behalf of the owner of the goods and is indicated in the bill of lading.

Cargo receiver

a person to whom, at the direction of the Cargo shipper, the goods should be issued at the destination point. Not being a party to the contract of shipment, he/she acquires certain rights and bears obligations stipulated by the contract concluded by the Cargo shipper with the carrier.

Cargo dimensions

these are the length, height and width, and weight of the cargo. There are standard-sized and oversized cargo.

Standard-sized cargo

is a cargo dimensions of which do not exceed the dimensions allowed for transportation and the norms established by the rules of the traffic. In other words, the standard-sized dimension is the size of the cargo that can be placed in a standard vehicle.

Oversized cargo

is a cargo dimensions of which exceed the dimensions allowed for transportation and the norms established by the rules of the traffic. In other words, oversized dimension is the size of the cargo that cannot be placed in a standard vehicle.

Net weight

the weight of the goods without tare and packaging.

Gross weight

the weight of the goods, including tare and packaging.

Is packaging necessary for cargo?

Yes, your cargo needs to be packed and/or palletized, which is the responsibility of the cargo shipper.
The volumetric weight of the shipped item (overall weight)- is a calculated value that reflects the density of the cargo. Typically, a less dense item occupies more space than a denser item of the same weight. The volumetric weight is calculated and compared with the actual mass of the shipped item to determine which of the values is larger. The larger value is used to calculate the shipping cost.

Consolidation of goods

is a process of sorting and accumulation of goods in a warehouse, collection and formation of goods sent by the same route.

ETD

Estimated time of transport departure.

ETA 

Estimated time of transport arrival.

Payment Process

After each shipment, our company will send an invoice, according to which you will pay the corresponding amount to the account number indicated in the invoice, and then send us a payment order.